The base paper is very difficult to peel off, and the adhesive on the Body side almost peels off if it is poorly untangled.
Also, the edges are peeled off at first, and then gradually turned up to a large size and pasted on, which also requires a lot of strength.
The feel is good, except for the sticking.
49.66 EUR (8,577 JPY) 50.96 EUR Save 3%
Webike Point: +86 pt
(0.49 EUR)
Informations de livraison
-
Please select product form first.
Description du produit ci-dessous est automatiquement traduit par Google.
Détail du produit
**Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the use of stomp grips that are attached to the frame surface.
*When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries.
The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it.
(It depends on the paint condition of the vehicle, but older vehicles need special attention)
*We do not accept returns or exchanges after the package has been opened.
*Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you.
*Please make sure to check the year of your vehicle before ordering..
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
Prudence
* S'il y a un mode d'emploi inclus, il sera en japonais.
LIENS DES PAGES MODÈLES
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
Nouveaux arrivages de produits d'occasion
Nouveaux arrivages de produits d'occasion
Produits prêts à être expédiés depuis le stock
Avis des clients
Reviews with image
![whole [Color] It's not Clear.](https://global-fs.webike-cdn.net/photo/impression/51/51e90f8b9d6816d93e66eb7393a297fbM.jpg)
Apr 17, 2022
Helpful?
Fits:YAMAHA YZF-R6 08-15
Mar 26, 2022
For installation, degrease the surface to be affixed.
The paper attached to the adhesive surface should not be removed all at once, but rather, about one-fifth of it should be peeled off and applied repeatedly. Do not touch it for 24 hours after applying it.
The knee grip becomes easier, so the fatigue level is completely different. It is very easy to hold my body when accelerating and breaking.
It would be great if I didn't mind those warts.
Helpful?
Feb 27, 2022
The knee grip is also very comfortable and I use it every time I buy a motorcycle.
View DetailHelpful?
Fits:KAWASAKI ZX-6R 09-15
Feb 2, 2022
Perfect for zx6r knee grip
Easy to install.
The jeans will be Damage Processing.
Helpful?
Dec 20, 2021
Installation is easy, just do it carefully so as not to put Air.
The feel of the product is slippery and does not bite well on some clothes.
Hmmm Motorcycle's or Tank's? Is it compatible with different shapes?
I wasn't very good.
I feel like it's worth the price.
It's so cosy that I wouldn't complain if I had bought it at about half price.
Helpful?
New Custom Articles
