Perfect for zx6r knee grip
Easy to install.
The jeans will be Damage Processing.
53.38 EUR (9,219 JPY)
Webike Point: +92 pt
(0.53 EUR)
Informations de livraison
-
Please select product form first.
Description du produit ci-dessous est automatiquement traduit par Google.
Détail du produit
**Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the use of stomp grips that are attached to the frame surface.
*When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries.
The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it.
(It depends on the paint condition of the vehicle, but older vehicles need special attention)
*We do not accept returns or exchanges after the package has been opened.
*Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you.
*Please make sure to check the year of your vehicle before ordering..
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
Prudence
* S'il y a un mode d'emploi inclus, il sera en japonais.
LIENS DES PAGES MODÈLES
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
Nouveaux arrivages de produits d'occasion
Nouveaux arrivages de produits d'occasion
Produits prêts à être expédiés depuis le stock
Avis des clients
Reviews with image
![whole [Color] It's not Clear.](https://global-fs.webike-cdn.net/photo/impression/51/51e90f8b9d6816d93e66eb7393a297fbM.jpg)
Fits:KAWASAKI ZX-6R 09-15
Feb 2, 2022
Helpful?
Fits:KAWASAKI ZX-6R 09-15
Mar 17, 2019
It has a very strong knee grip to the touch
I chose the Black one because the white one had bubbles that stood out
It hurts with thin Pants, but I usually run with Protector, so in that case, it's a little It's only painful
I bought it because I can feel that my knees don't feel like they're moving at all, and I can feel that they're Firmly fixed I'm glad I did
Helpful?
Fits:KAWASAKI ZX-6R 09-15
Oct 30, 2015
I bought it because the body slides forward
I put it on ninja 250 r, but if you attach it, Knee grip will become much easier
Exclusive Design makes it easy to install
However, I think that warts are a bit painful when riding with thin Pants so please wear thick Pants LOL
Helpful?
Fits:KAWASAKI ZX-6R 09-15
Aug 16, 2015
I bought it with reference to your impulse. After curing for 3 days as prescribed, as I tried riding, glue on the adhesive surface melted out due to the heat of the Radiator fan? Or Engine and it got sticky. Also Pants also. I solved it by wiping it off with Parts cleaner, but since it will be a hot day for a while, I will try to ride while observing.
Helpful?
Fits:KAWASAKI ZX-6R 09-15
Jun 6, 2015
I pasted it immediately after delivery.
Yukkuri If you carefully stick it, bubbles will not enter.
For city riding, Black Parts at the bottom of Tank is Quantity : Pair (for Left and Right) I stuck it in reverse.. It might be good even on the lower side.
Grip is good.
Tank Pad is an OEM Product.
Helpful?
New Custom Articles
