PC20 Carburateur

Torque up was experienced

Very Good

Jul 20, 2019

It was installed in DAX of 98cc Spec. that was using Deni18 of Takegawa
Manifold is made in Takegawa as it is
The Power Filter was also able to use the K&N as it was

I thought it would be a good idea to install it with Stages with Manifold
I tried to match the size and the port position, but it looks like I made a perfect match with Manifold two (used in legal documents)
There was no Gap either
So I quickly installed it and took it for a test run
The Air Screw was fine with 1 and 1/2 back, but the Main jet is a bit dense name
It's like
The standard is #95, but with my DAX, I'd say #92 or #90 is about
I think it's going to be good

one of the most obvious effects of changing the carburetor is that the torque will be reduced considerably in the mid-speed range Up, and I was able to get a better ride on Speed when I re-accelerated from being flushed in 2nd or 3rd gear I understand
If you go touring or other long distances, it's good

It's a good thing the product came in a simple Package..
It was Big Li that it didn't include an instruction manual or anything else

Helpful?

Excellent

May 4, 2016

I attached it to MONKEY

PC 18 that I was attaching to MONKEY is bad (?) Because it became,
I thought about Bore up to 88 cc in the future and made it to PC 20.

I chose DAYTONA made it cheap and my favorite Brand.

I have not changed the initial setting,
I run normally and I am in better condition than PC 18.
I want to quickly Bore up (Lol)

Helpful?

Excellent

Apr 19, 2016

Used for MONKEY

I am using it for MONKEY.
PC 18 that I used before was not good (?) For this reason,
I made it to PC 20 I heard that the range of correspondence of Engine Displacement Volume is wide.

Because Engine bought in second hand, accurate Engine Displacement Volume is unknown (Please enter 72 cc in Cylinder) but,
You can use it as it is without touching Setting.

Recommended items.

Helpful?

Because the PC 20 I used up to now is in bad shape

Excellent

Oct 16, 2015

Even though it was PC 20,
I was replaced this time because I was feeling sick after many washing.
6V88CCNormal head Used in machining, use, run with ordinary running.
Needle clip Run number better in the middle in the middle.
Again the new item is nice.

Because the PC 20 I used up to now is in bad shape

Helpful?

Excellent

Sep 24, 2012

It was used for the MONKEY which carried out the Bore up to 85 cc.

Till then, before carrying out a Bore up, it was PC18 attached, but as for after exchange, playing truant going up changed suddenly.How depending on which the
> Engine also turns will be very smooth, and will twist a Throttle to high rotation in spite of itself.Power also came to come out markedly.Although Pons attachment also of the Setting of the
> Jet was carried out still in the state at the time of shipment, it can be used satisfactorily at all only by tampering with an Air Screw and an Idling screw just for a moment.If my

and Jets are exchanged and arranged, it is likely to be in a better state.