Very great quality and craftmanship.Feels very solid and sturdy when my feet is resting on the rearsets.I purchased these rearsets to combine together with my Yoshimura GP Magnum Exhaust because its a direct bolt on with the rearset exhaust stay bracket.Installation is fairly easy specially if you have the proper tools on hand.One of the reasons why i purchased these rearset is because the gear selector linkage is very solid and direct compare to the factory linkage which has alot of movement and play due to the way it was designed and a reason to not buy a separate linkage since it is already built in with the rearset.
View Detail
426.75 ~ EUR (73,700 JPY)
Webike Point: +737~ pt
(4.26 EUR)
Informations de livraison
-
Please select product form first.
Description du produit ci-dessous est automatiquement traduit par Google.
Détail du produit
[4 positions]
・113mmBACK/57mmUP
・113mmBACK/67mmUP
・123mmBACK/57mmUP
・123mmBACK/67mmUP
[spécifications]
Pour le tuyau maître/interrupteur/frein STD
Pas de marche en tandem
Pas de changement inverse
**Lorsqu'il est utilisé avec le silencieux d'origine, la protection thermique du silencieux d'origine interfère avec la pédale de frein et doit être remplacée par la protection thermique du silencieux STD (référence : 57-223-01).
*Si vous souhaitez utiliser un tandem, nous vous recommandons d'acheter la version tandem ou le kit de conversion tandem (90-223-51/90-223-51B).
*D'autres produits sont inclus dans l'image.
*Il arrive que les spécifications d'un produit soient modifiées à la convenance du fabricant. Veuillez comprendre.
.
Une conception entièrement nouvelle de la marche arrière a été développée sur la base des données disponibles jusqu'à présent..
La conception rigide et l'utilisation de roulements dans les parties mobiles soutiennent les mouvements de base du travail à la marche..
Facile à conduire et agréable à manier..
Il est également facile de passer d'une configuration simple à une configuration tandem, ce qui évite de devoir modifier les spécifications..
Prudence
* S'il y a un mode d'emploi inclus, il sera en japonais.
LIENS DES PAGES MODÈLES
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
Nouveaux arrivages de produits d'occasion
Nouveaux arrivages de produits d'occasion
Produits prêts à être expédiés depuis le stock
Avis des clients
Reviews with image
Fits:HONDA GROM 21-22|23|24-
Fits:HONDA GROM 21-22|23|24-
Installed on: HONDA MSX125 (GROM)
Apr 18, 2023
Everything fits well Tooks around 3 hr to install. The instruction was ok just takes sometime to translate and look at the pictures carefully to know where all the spacers and bolts goes. i would recommend if you like more sporty style and foot position toward the back,
View DetailHelpful?
Fits:HONDA GROM 21-22|23|24-
Nov 17, 2021
OVER's Rear Sets have a very nice texture!
OVER's Rear Sets were introduced to the JC92 Grom.
Silver anodized texture is very good.
Also, before I bought it, it said 123mm Back, 57mm Up.
I thought it was too BACK.
The grom originally has a footpeg closer to the front.
It is rather just right.
I am 178cm tall.
Shift touch will tightly but
It is now hard to get into Neutral.
I just put it on, so I don't blame you.
I'll see how it goes a little more.
Brake has lost its play and is just a little bit stepped on.
It will be a full Brake.
When I was an OEM, I had to drop down a bit when starting up a hill.
After replacing with Rear Sets, it no longer drops.
By the way, I don't do Circuit or Gymkhana.
It is also useful for street youthOnly.
I don't mean to rub it with Normal step or anything at all...
As for the installation, it was quite a challenge.
It took about three hours of one-person work.
The installation instruction manual is not very good, and the OEM footpeg can not be removed.
There is no explanation regarding this.
It begins with the assumption that it has been removed.
The photo is monoBlack and hard to see, and the OEMWasher is
I was told to put OEMWasher where it is not in.
It is stated.
Bolt tightening Torque values are also not listed separately.
It just has a general Torque value legend.
After installation, I thought that the Shift rod and
There is no gap in the Base plate.
It may or may not be 1mm.
And with a Cap holding the footpeg.
M8 Bolt, but this is not acceptable.
If it comes loose, you can hold it with a Hexagonal Wrench 6mm from the back of the Plate.
I'm tightening it in from the footpeg side with a 19mm Spanner.
Hexagonal Wrench will not fit after hitting Swing Arm. (especially on the Shift side)
I would have liked to have had a hexagonal head Bolt here.
Spanner is by far the easiest to retighten on the go.
As for the Exhaust System, YOSHIMURA's GPMagnum will be attached without any problem.
Well, I wrote a lot of things, but I'd like to use the footpeg of another Manufacturer.
I don't think we have a choice.
Helpful?
New Custom Articles
