I'd done the installation Daytona Power supply USB 2 port on my Hayabusa for smart phone and camera action, the stock clip-on handle bar very narrow, so lucky because it fit. I just go around down town all stable operation.
View Detail
DAYTONA
Alimentation électrique exclusive pour motocyclettes Port USB 2
Product # 98438
4.5 (31 avis)- Vente
- Instock
20.52 EUR (3,539 JPY) 26.67 EUR Save 23%
Webike Point: +35 pt
(0.2 EUR)
Informations de livraison
In Stock, Ships within 24 hours.
Estimated arrival date around
Description du produit ci-dessous est automatiquement traduit par Google.
Détail du produit
Type : 2-port
[Entrée]
Tension d'entrée : DC12V
Gamme de tension d'entrée : DC10V-16V
Courant d'entrée maximal (sans charge) : 6mA ou moins
[Résultats]
Tension de sortie : 4.8-5.2V
Courant nominal de sortie : 2.4A (1-port)
Efficacité de l'évaluation des résultats : 24W
Épaisseur : 13.5mm
Sortie : 5V/2,4A par port
Pince de guidon correspondante : Φ22.2mm/Φ25.4mm
[Contenu du produit]
Boîtier d'alimentation USB x1pc.
Entretoise en caoutchouc x2pcs.
Harnais d'extension x1pc.
Harnais de branche de l'interrupteur de frein x1pc.
Connecteur de câblage x1pc.
Bande de câble x2pcs.
[Spécification]
Enregistrement d'un dessin ou modèle Produit
Spécification simple d'étanchéité
**L'espace de montage ne doit pas être fixé près de l'interrupteur de commande d'une poignée de véhicule séparée.
* Veuillez ne pas verser d'eau directement sur le produit pendant le lavage.
*Branchez le câblage avec la clé principale ou installez un interrupteur séparé pour éviter que la batterie ne monte..
Alimentation USB mince de 13,5 mm d'épaisseur.
Spécification à haut rendement de 5V/2,4A par port. 2 ports au total de MAX5V/4.8A
Le câblage est aussi simple que d'obtenir du courant à partir de l'interrupteur de frein.
En utilisant le harnais d'extension, le câblage peut être fait à partir de la zone de la boîte à fusibles..
Puissance de sortie élevée de 1 port MAX 5V/2,4A.
En se connectant à l'interrupteur de frein, il peut être mis en marche et arrêté en conjonction avec la clé principale..
Il est possible d'utiliser le faisceau de rallonge attaché pour les véhicules qui ne peuvent pas être connectés à l'interrupteur de freinage. Il peut être câblé depuis le voisinage..
Interrupteur mince et élancé, conçu pour correspondre à l'interrupteur de commande.
Prudence
* S'il y a un mode d'emploi inclus, il sera en japonais.
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
Nouveaux arrivages de produits d'occasion
Nouveaux arrivages de produits d'occasion
Produits prêts à être expédiés depuis le stock
Avis des clients
Reviews with image
Installed on: SUZUKI GSX1300R HAYABUSA
Jul 20, 2022
Brake switch branch wiring is also included and was easy to install even for beginners.
View Detail
Helpful?
Jul 5, 2022
Slim and location-independent design.
[How is it used?
While I was searching for something good to secure the power source for my smartphone and Camera etc., which are now necessities, I came across this product, which is slim and can fit in the gap between the Handlebar and the Refreshing and purchased it.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
Helpful?
Jul 5, 2022
Mast items to run while charging cell phone.
I think most Motorcycle riders have it installed.
Helpful?
May 7, 2022
It looks very Simple, so
It is a SMART design as if it were installed as standard in NORMAL.
The body is very thin and unobtrusive. Installation is also easy since power can be obtained from the Brake switch.
Helpful?
New Custom Articles
