I added the OEM Carrier because it is inconvenient to go camping and use it in daily life without Carrier.
The design is OEM! The Matte Black color fits perfectly. The Matte Black color fits well. With this, the Carrier and Seat together can hold a lot of luggage.
The installation was quite large and strange. I'm not sure what's wrong with it.
The front screw was large and strong, but the rear screw didn't fit, and the width of the body was 5mm wider than the front screw. As a countermeasure, I shaved the hole of Carrier and widen it, or I widen the area of the rear screw of Carrier. I thought it would be too large to shave the hole, so I widened the Carrier by 5mm.
I had to make a hole in the side cowl for the rear screw, and the instruction manual said to make a 20mm hole, so I did, but the sleeve that goes in there is about 16mm, so there is a lot of gap, and if it rains, water will leak into the side cowl. If it rains, water will leak into the Side cowl. Since Yamaha says this is fine, it probably won't be a problem even if water gets into the Side cowl, but personally, I'm concerned, so I'm thinking of sealing something here in the future.
The installation was quite large and strange, but I'm glad I did because it matches the vehicle perfectly and the load capacity is increased.
I have the service manual for the MT-25, but even without the manual, you can remove the covers as you see them, so if you have the Drill, you can add this carrier.
- Instock
178.56 EUR (30,800 JPY)
Informations de livraison
In Stock (à l'Entrepôt du partnaire), Ships around 23rd Jul. 2025
Estimated arrival date around
Conforme
-
YZF-R25
19-21
-
YZF-R25
2WD1
-
YZF-R25
B021
-
YZF-R3
Voir tout
YAMAHA
Détail du produit
[Numéro de pièce du fabricant] Q5K-YSK-088-F01
Couleur : Noir mat
Matériel : Acier
Top Case dans les limites de la capacité de transport maximale : 3 kg
**Il faut percer un trou de 20 mm dans les deux couvercles latéraux lors du montage du YZF-R25/R3.
*Il ne peut être monté sur MT-25, MT-03 : une barre d'appui..
La tuyauterie qui correspond à la conception de la queue du MT-25, MT-03 est un tube d'acier attrayant avec un porteur arrière peint en noir mat.
Il est possible de monter le top case 39L + socle EURO YAMAHA qui sont vendus séparément.
Prudence
* S'il y a un mode d'emploi inclus, il sera en japonais.
LIENS DES PAGES MODÈLES
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
NOUVEAUX ARRIVAGES DE PIÈCES D'OCCASION POUR
Nouveaux arrivages de produits d'occasion
Nouveaux arrivages de produits d'occasion
Produits prêts à être expédiés depuis le stock
Avis des clients
Reviews with image
Fits:YAMAHA MT-03 , YAMAHA YZF-R25 , YAMAHA YZF-R25 2WD1, YAMAHA YZF-R25 19-21, YAMAHA YZF-R25 B021
May 30, 2021
Design-wise, it's a perfect match to the body.
Fits:YAMAHA MT-03 , YAMAHA YZF-R25 , YAMAHA YZF-R25 2WD1, YAMAHA YZF-R25 19-21, YAMAHA YZF-R25 B021
Jul 30, 2017
It is mounted on MT 03 with almost no loading capability
Even if you only have this Bag, even if you tie the bag with Net, it will be very useful.
It is also good looking.
It will be installed along the line of the car body, so it will make you look a little Large
It also becomes a substitute for Rear's Bumper at the same time.
Fits:YAMAHA MT-03 , YAMAHA YZF-R25 , YAMAHA YZF-R25 2WD1, YAMAHA YZF-R25 19-21, YAMAHA YZF-R25 B021
Apr 27, 2016
Motorcycle = renewal with less loading. Everything is Clear.
Purchase by staying with Long touring. It is only OEM and relieved. Even when you do not attach Case, SeatBack can be attached easily, super convenient.
Only Minus was miscalculated only that the Helmet holder attached to Tandem Footpeg was not able to be attached.
New Custom Articles
