It is a hand guard of the feature to suit not only an off vehicle but most motorcycles, since it is a wearing system fixed only by bar end.
Tough that's right rather than having considered since it fixed firmly in the larger color although the mounting

The VisorType I had on before may be good for rainy days, but I rode about 50km yesterday (Jan. 31) and this one may be more warm-proof due to its wrap-around shape. And although I don't want to fall, I feel more secure, and for someone like me who is not confident in riding, I think I may have a little more room for something.View Detail

[How is it used?
Used mostly for city driving (commuting). Introduced as a measure against the cold in winter.

Was the one you received as per Image?
I had previously purchased a light cowl from ACERBIS and felt that the texture, etc. was worth the price, but
No problems with this product either.
If I had to say, the screw on the inside of the guard (Lever side) is Silver color and a little cheap.

Was the installation difficult?
I think it's easy to install, just insert the Bracket and tighten the Bolt.
Only Honda cars? Or, because it is Large strange to take the Bar End and Inner Weight.
I think it will be how we get through this.

How was your experience with it?
It worked much better than I expected.
Even with the Winter Gloves & Grip heater, the back of my hand would get cold after riding for about an hour.
It's getting harder, but the driving wind is much less likely to hit me, so sensibly the cold on the back of my hands has dropped by about 90%.
Thanks to this, I can ride comfortably with 3SeasonGloves & Grip heater without using thick Winter Gloves.


[Included Parts:were they on?
It had several kinds of collars for adjusting the gap with Bar End.

[Was there anything that disappointed you?
None in particularView Detail

SEA BASS, attached to a dixer. It is perfect. I did not attach Spacer of enclosed Handlebar End and it was able to install easily and surely. Initially, I searched for a shape that can be attached firmly in the Handlebar End and the middle part, but in case you move the MASTER or, in some cases, buy an expensive mounting bracket and consider Risk that can not be attached, it is cantilevered , I looked for a firm product. Basically it is a satisfactory product if you think with Lever protection degree at the time of standing. Moreover, Design is also clean and the grade is high product. However, because it is expensive, I hesitated for a moment but I think that there is no other item of this Level.View Detail

【What made you decide the purchase?】
Purchased for the purpose of wind protection in the winter.
NORMAL's Handlebar around Handicard dedicated to the model of the premise is also sold by other companies, but my MT-09 is equipped with an external radial master cylinder, so I thought the installation was suspicious, only on the Bar End side I was looking for a Universal Type Hand guard to fix with.
Search variously and compare - As a result of examination, we reached the purchase of Dual roadHand guard of ACERBIS of Design which seems to be uncomfortable even when wearing on MT - 09.

【How was it actually used?】
?Design?
Speaking of Hand guard, it is an image of Off-road, but we are satisfied with Design which does not feel uncomfortable in Motorcycle for Road.

?Quality - Texture ?
The surface finish is textured and it is very astringent.
It was already peeling off just when Plating in the Logo portion of ACERBIS arrived at hand. It's a small part so it does not stand out, but it's a brand new with this brand new.

?Safety?
Hand guard itself is all resin so it's a bit uneasy to think about anything.
I think that it is a better Level than nothing compared with the Hand guard of Gold genus for Off-road.

?Windbreak effect?
Since the area of ??the hand guard is small, high-speed etc etc. Winds come around as they come out with speed, so it is impossible to prevent the wind perfectly.
However, since there is no thing that can block anything at all, it will definitely prevent the wind from being in the state of NORMAL, so I think that you can feel the effect especially when traveling in the middle of winter.
In my case I'm wearing a Grip heater on my car, so I was able to do the midwinter long distance touring without difficulties with the guards of Hand guard and the warmth of Grip.

?Vibration?
Because it is fixed only on the Bar End side, so when driving at high speed etc.. Although I was concerned about the vibration of Gold, since it can be fixed to Handlebar and Firmly with Gold Adapter, there is almost no vibration.
Just because I fix all with Bar End part, especially long distance Touring tighten up etc before departure etc etc. Checking

【Mounting was difficult?】
?For Universal Handlebar?
In the case of the external large Universal Handlebar of Large Foreign, the inside of the Handlebar is Flat, so if it is compatible with the inside diameter, it can be mounted as it is using the supplied Adapter.
Though it is dangerous to throw in GripLimit and aim for the beauty of appearance, it is a thing called humanity, but especially Throttle side is dangerous if it interferes and hinders movement, so it secures a certain Space of the attached Color I think that I am relieved.

?In case of OEMHandlebar?
Large Mr. OEMHandlebar says Screw is cut in the inside of the Handlebar, the installation can not be easy.
I am sorry that it became a story limited to MT - 09, but I purchased Posh 's Solid Bar End OEM Handy type Yamaha M16 Type separately and diverted only the Adapter part and worn it.
Even if it is not Posh's Bar End, I think that it can be diverted if it is a type of Bar End that fixes Bar End with Bolt of M8 with OEM Handlebar compatible Bar End.
I also wrote above but do not forget to secure the space with Grip.

?Others?
Brembo 's Radial master cylinder is attached to my car, but since it was discovered that it will interfere with hand guard installation, we are processing it.
Disassembled the Hand guard, cut the resin of the Smoke part with Hot cutter, cleaned the section with File and Compound and finished it.
As the hand guard is bent toward you, I think that machining is necessary for vehicles equipped with a radial master cylinder, not limited to brembo.

【Please tell me the installation point and hang】
I think that it is a thing that wants to attach to the Stylish without making a gap between Hand guard and Grip, but especially if Throttle side interferes with Grip during running it is Large and it is dangerous and it is dangerous, so the attached Spacer It is safer to wear it with a margin using.

[Is there anything I was disappointed about?]
It is unnecessary because it was made from the shape with the Universal Product and processed and prepared at will.

【Hope for Manufacturer - Please let me know if you have any improvement points]
I think it is a bit expensive considering as a Hand guard of All resin.
Preferably Aluminumetc. I wanted you to reinforce with lightweight Gold genus.

【Have you compared items?】
None.

[Others]
Speaking of Hand guard, it is an off-road image, but I think it is an ambitious product to overthrow it.
Depending on the type of car you may not be able to wear polo, but because it can be anything depending on diversion and processing, so if you say that your hands are cold and unavoidable when driving in the middle of winter, on this occasion, how about hand guard?View Detail

I was troublesome at the time of purchasing a new car so I installed it at a dealer. Although I was anxious about the strength because I stopped at the Grip end, the Guard itself was solid even if I stood, and I was relieved without any Damage around Handlebar. Also it does not interfere with pouch Screen. However, Windproof is NG!View Detail