?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I thought that Q4 was the most quiet, so I bought it.
I think that it is each person, but it is quite a blast to me.
Aluminum Tape 1 in the net part of Baffle 1 / I rolled about 2, it was quite silenced.
The original purpose is satisfied because it is light weight. OEMSilencer is very heavy, it seems that the position of MOTARD car Silencer is high and it affects turning and turning, I think that it became easy to get on very well.
The sound quality is very good!
Installation did not have any problem.
The exhaust system is Exactly right for the WR, and it goes great with the SP Tadao.
Power Core is also recommended for Exhaust System.
If you are concerned about the noise, you can suppress it by putting on the Low noise inner.View Detail
I wrote about the Power core blast
It's popular and pricey, but first of all it looks, sounds and performs
There's no doubt about it!
The popular exhaust pipe, PowerBox, and the best compatibility, and we have put on both of them the..
The PowerBox is too Garbage and Bigli
The normal exhaust pipe is much better than the normal exhaust pipe in terms of both fee ring and power output ! (I lost 15,000.)
The normal exhaust pipe gets all the power up to the red zone at once against
The PowerBox feels like the power is gently constant, and the Axel's luck drops
(I guess it's just that it's easier to handle for people who only use low RPMs
250 is so quick, I'll be spinning around to Red It's more of a hindrance...)
Honestly, all I need is an FMF Silencer!
View Detail
We attached it to WR 250 X together with SP Tadao - Power Box, KTM - Inner Pressure Control Valve. Cancellation between AIS and EXUP.
When installing, it is impossible to mount it unless the Bolt length of Center is Limit and the Exhaust System is pressed Exactly to the vehicle body side. The joint with Exhaust pipe is perfectly connected by using liquid Gasket.
The exhaust sound is quite annoying. The sound like Helicopter, the pedestrian frequently looks back. Until I got used to it, I felt starkly conspicuous and felt embarrassed, my family was told I was a reckless family. It may be better not to buy people who feel NORMAL is annoying.
Moreover, since it is a considerably missing Exhaust System, we think inevitably improving the intake system and adjusting the fuel injection. When OEMAir cleaner was left intact, there was a considerable shortage and I was annoyed by AfterFire in Axel on from Emblem.
After Clearance of Air Clean Box's top cover, hole drilling in Box's side lid, after changing to Air cleaner in Notebook, even after setting fire pressure +6 AfterFire AA ceased to appear. If capital gains allowance, ECU renewal or sub computer installation should also be done.
I do not know whether the Exhaust System Single Body is affecting, but the fuel economy for driving has increased to the Large width. From town ride 22-24 km to 30 km ~ and so on. It may be possible to expect up to 35 kilometers for a touring in a distant place.
View Detail
The ease of handling at low speed is visibly improved. Gelo - It will not be stalled unless it stays in a gallelet etc.. It will accelerate even one high GEAR.
Installation was done with reference to the Instruction Manual and Net articles and completed in about an hour. I think that it is better to work with two or more people because it is easy to install when there is a person to support it. Apart from doing the removal of EXUP's Wire by force, there was no particular step to stepping on. I did not do any special processing.
I connected to SP Tadao's PowerBox, but if I paint liquid Gas cleanly Gas will not leak and fit perfectly.
The exhaust sound is further emphasized when Baffle is removed with the bass called Dodododo. When I took off Baffle I felt that both Torque and Power went up. I think that it can not be recommended in a residential area because it is said to be Level which can be heard even from afar from home to return home.
View Detail
We attached it to WR 250 R in combination with PowerBox. Predecessor Ad Vise Street M10 × 20P1. Prepare 25 Bolt in advance and have a correct answer. Installation is almost pon attachment. I was processing the Japanese specification but I'm touching a little Frame.
It's pretty, but it's pretty difficult to stall with this combination (Lol) The low-speed Torque valley disappears spectacularly. As the valle disappears, the feeling of riding Cam disappears and it is easy to get on.. But it is compatible with the well-running Engine and the 4-speed 100 kilometer arrives quickly and we are paying attention to the speed breach.
It was a wonderful seasoning than any TRAIL you've ever had. Moreover, it is not violent like Racer but feeling tired.
I am satisfied with performance, sound and quality. By the way, burning + 3, ai removed from Air cleaner Blowby discharge, EXUP removal, Diaphragm removed. There is no AfterFire.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING