3.88 EUR
(633 JPY)
3.55 EUR
(578 JPY)
(9% de réduction)
4 (14 Avis)
Very Good
The installation is tight but the appearance is goodIt is somewhat thick against the diameter of Step end, so it was pretty rugged so it was hard to install.
The last 1 mm does not end up inevitably, but there are gaps, but it is not noticeable and I do not think I will force it.
OVER's Logo is One Point. If you are not concerned about this, logo absence is Motorcycle ○ Because it is cheap about 30%, it is also good to purchase there.
Reviews For OVER RACING Embout de repose-pieds avec logo From Other Webike User
Excellent
Very cool end caps!I used mine as handlebar end caps, and it turned out great. The caps was a tiny bit to narrow for perfect fit inside my handlebar ends, so I made the caps a little bigger with shrink tube. Worked perfect and looks awesome.View Detail
Very Good
OverFootpeg End Capwith LogoTo install, remove the footpeg and place the cap underneath and tap the footpeg with a hammer. If you leave the footpeg on the car, it will not fit. It is installed on the Tandem side. It is a little fashionable.View Detail
Excellent
I love itOVER RACING's Rear Sets.
OVER RACING on the end
End cap installed!
Size is a little bit large for Universal.
You'll have to scrape and tap a little bit to screw it in.View Detail
Excellent
Mounted on OVERTandem Footpeg BarI installed it on the OVERTandem Footpeg Bar It was installed to OVERRear Sets Bar before, but it was installed to Tandem Footpeg Bar and the Rear Sets bar have the same inner diameter Also, a hang was needed to install the Rear Sets bar, but Tandem Footpeg The bar needed a mounting hang as well The mounting tool is a great way to avoid scratching the footpeg "Aided wood and end cap so as not to damage it "Thick Dustcloth In order to make it easier to enter the footpeg, the end cap, to shave the insertion part into a taper shape File and to make it easier to get in "Silicon spray and End cap for typing "Prahan You can type beautifully in!
The work is for reference only! As such, please do so at your own risk
The OVERLogo also has a certain look and feel, so when you install it, check the image of the finished product It is recommended to work afterwards I don't think the end cap will come off once it's been driven inView Detail
Poor
It is only Parenthesis.Even if you hit it with Prague on hand, you can not go in any way. It was useless to soak in hot water and warm it up. I thickened it in the Device, I got a little strange but it floated a little. Left's change side has become oblique. It happened that I planned to go to Shop to exchange the Tire, so I got it to come in at the same time. After all, PRO has tools and arms quite different.
In addition, it was Yellow as the character of Logo whether it was a long-term inventory item.View Detail
Most Viewed Reviews Of OVER RACING Other Step / Back Step Options / Repair Parts
Excellent
Very cool end caps!I used mine as handlebar end caps, and it turned out great. The caps was a tiny bit to narrow for perfect fit inside my handlebar ends, so I made the caps a little bigger with shrink tube. Worked perfect and looks awesome.View Detail
Very Good
OverFootpeg End Capwith LogoTo install, remove the footpeg and place the cap underneath and tap the footpeg with a hammer. If you leave the footpeg on the car, it will not fit. It is installed on the Tandem side. It is a little fashionable.View Detail
Excellent
I love itOVER RACING's Rear Sets.
OVER RACING on the end
End cap installed!
Size is a little bit large for Universal.
You'll have to scrape and tap a little bit to screw it in.View Detail
Excellent
Mounted on OVERTandem Footpeg BarI installed it on the OVERTandem Footpeg Bar It was installed to OVERRear Sets Bar before, but it was installed to Tandem Footpeg Bar and the Rear Sets bar have the same inner diameter Also, a hang was needed to install the Rear Sets bar, but Tandem Footpeg The bar needed a mounting hang as well The mounting tool is a great way to avoid scratching the footpeg "Aided wood and end cap so as not to damage it "Thick Dustcloth In order to make it easier to enter the footpeg, the end cap, to shave the insertion part into a taper shape File and to make it easier to get in "Silicon spray and End cap for typing "Prahan You can type beautifully in!
The work is for reference only! As such, please do so at your own risk
The OVERLogo also has a certain look and feel, so when you install it, check the image of the finished product It is recommended to work afterwards I don't think the end cap will come off once it's been driven inView Detail
Poor
It is only Parenthesis.Even if you hit it with Prague on hand, you can not go in any way. It was useless to soak in hot water and warm it up. I thickened it in the Device, I got a little strange but it floated a little. Left's change side has become oblique. It happened that I planned to go to Shop to exchange the Tire, so I got it to come in at the same time. After all, PRO has tools and arms quite different.
In addition, it was Yellow as the character of Logo whether it was a long-term inventory item.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING