6.99 EUR
(1,139 JPY)
4 (6 Avis)
Very Good
Price is high but goods are goodBecause I can install both 6 Bolt car and 12 Bolt car, I bought it for Yamaha For-Gel 50 but VOGEL can not be used because it is an exchange, so I used it for Yamaha SEROW 225.
Reviews For GOODS Ampoule à DEL From Other Webike User
Poor
Badly built and dark.I installed a Yamaha TDR80 with 12V electrical system.
When I applied force to install it, the LED installation board part caved in and spun around in the middle of the Valve, damaging it.
The parts are only connected with a Glue gun, so it will come off with a slight force.
Fortunately, there was no wire breakage, so I was able to repair the part by putting it back in position and fixing it with instant glue.
It's bright, but honestly, it's dark.
The original Xenon sphere seems brighter.
The LEDs all light up, so it doesn't seem to be a defective product.
The power consumption is low, as you would expect, and there is no flickering with all the lights on as the Blinker blinks.
I plan to use it until I replace it with another high light one.
View Detail
Poor
It's brokenAfter six months of use, the body has finished splitting in two from the mounting area
I changed to LED in order to avoid running out of bulbs, but I didn't expect the body to be brokenView Detail
Very Good
CostValue Good? Off tail lamp is turned into LED by cutting off well on off-road
? Easy to install, light intensity is usually a little darker than the valve (About 20% reduction?) Is it acceptable?.
? It is a good choice whether to reduce the risk of ball depletion in off-road running, the gentleness to the battery with reduced power consumption.View Detail
Excellent
Required brightness and power savingPurchased for 6 VDAX Tail lamp with unstable power generation. Headlight got brighter on the surface after replacing ♪ The making itself is a bit sloppy, but it is not a problem in function. It's easy to install just replace the existing Lamp.View Detail
Most Viewed Reviews Of GOODS Tail Lamp Bulb
Poor
Badly built and dark.I installed a Yamaha TDR80 with 12V electrical system.
When I applied force to install it, the LED installation board part caved in and spun around in the middle of the Valve, damaging it.
The parts are only connected with a Glue gun, so it will come off with a slight force.
Fortunately, there was no wire breakage, so I was able to repair the part by putting it back in position and fixing it with instant glue.
It's bright, but honestly, it's dark.
The original Xenon sphere seems brighter.
The LEDs all light up, so it doesn't seem to be a defective product.
The power consumption is low, as you would expect, and there is no flickering with all the lights on as the Blinker blinks.
I plan to use it until I replace it with another high light one.
View Detail
Poor
It's brokenAfter six months of use, the body has finished splitting in two from the mounting area
I changed to LED in order to avoid running out of bulbs, but I didn't expect the body to be brokenView Detail
Very Good
CostValue Good? Off tail lamp is turned into LED by cutting off well on off-road
? Easy to install, light intensity is usually a little darker than the valve (About 20% reduction?) Is it acceptable?.
? It is a good choice whether to reduce the risk of ball depletion in off-road running, the gentleness to the battery with reduced power consumption.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING