20.77 EUR
(3,400 JPY)
17.99 EUR
(2,945 JPY)
(13% de réduction)
4 (15 Avis)
Very Good
Prevention of burning of Up Exhaust PipeIt is easy to install because it can be bent freely along the exhaust pipe. It is easy to install because it can be bent freely along the exhaust pipe.
Reviews For DRC Tuyau d'échappement 4-Cycles From Other Webike User
Excellent
Installed on DG32JXG250 TRICKERI replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.
As you can see in the picture, the heat seems to be avoided as it is back to near normal exhaust pipe.
The length seems to be more than 5cm shorter than Normal heat guard, but I think it's OK at first.
I like the looks of the NORMAL better, but I think this is the one.View Detail
Excellent
I processed and installed it.I machined and attached it to the BEAMS front pipe.
The standard Guard melted the hem of the Pants.
Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard.
Do not use the supplied band, use the screw holes on the Exhaust Guard that comes with the front pipe.
I used the holes in PipeGuard as they are on the front side and drilled holes in PipeGuard to secure the rear side.
The front side is gradually bent at an angle to match the curve of the exhaust pipe and the rear side remains straight.
The Guard is all floating from the Pipe.
I've run it on the road and it doesn't seem to have any problems with vibration.View Detail
Excellent
It's better than the OEM Guard.When I replaced it with the 4 Strike Competition Exhaust Pipe of RSV, I installed it for the purpose of heat protection and shielding.
important item
[Was there anything that disappointed you?
It's not a disappointment, but since you can cover a wide range of the exhaust pipe, the Material:It's a little disappointing that the beautiful burn color of the Stainless SteelExhaust pipe is hidden from view.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There was nothing in particular
[Do you have any products to compare it to?
The Exhaust Pipe Guard for 2Cycle is too large and expensive, so this is the only one I could find.
Frequently Asked Items
What made you decide to buy?
As a 4Cycle exhaust pipe UniversalGuard, I bought it because it is the cheapest and longest I have ever seen and it can cover a wide area.
Was the installation difficult?
There is a method of attaching the guard directly to the exhaust pipe, but it does not work for the purpose of heat shielding because the heat of the exhaust is transferred to the guard, so you can install the guard away from the exhaust pipe in the same way as the OEM. Quantity of the ReplacementMount Kit (item number:ZC31-3901):I used 2 sets and installed it. Technically, there is nothing difficult, but because the clearance between the engine cylinder and the exhaust pipe is narrow, I had to use my head to decide the position of the Band and the direction of the Screw to attach the Mount to the exhaust pipe.
【Please tell me the installation point and hang】
Guard is Material:Because it is aluminum, it can be bent to some extent, but extreme bending is not possible, so it is necessary to decide the position of the Mount so that the Guard will fit the shape of the exhaust pipe well.
How was your experience with it?
By using the Mount Kit to mount the guard away from the exhaust pipe, the heat from the exhaust pipe is not transferred to the guard as it should be, and the temperature is high enough that you can touch the guard with your bare hands without getting burned.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
Stainless Steel Band for Exhaust pipe installation is Quantity:2pc. Set was on.View Detail
Excellent
That's pretty good!When running a Dirt, the exhaust pipe is full of small stones, etc Installed
It is easy to install because it can be bent along the curve of the exhaust pipe
It's good for dressing up as well as protecting the exhaust pipeView Detail
Excellent
The claim is amazing!I installed it because it can be expected that Wear will melt with Exhaust pipe.
Bending can be done according to the shape of Exhaust pipe so it was easy to install.
There was no resonance due to the vibration at the time of traveling, and there was no chattering noise.
I like the likes and dislikes because the shape is unique.View Detail
Most Viewed Reviews Of DRC Exhaust Guard / Heat Guard
Very Good
Burn Prevention[How is it used?
It is used on a 2022 CRF250RX.
The Exhaust pipe is directly on the side of the body, so if it falls over and gets caught between the legs, it will likely not be hot enough.
I heard that if the Jersey was melted, it would be enough, but if not, the nerves would burn out and there would be no way to recover.
Was the one you received as per Image?
It was more solid than I expected.
Was the installation difficult?
Very easy to install, just adjusting the angle to allow for the slotted screwdriver.
How was your experience with it?
Fortunately, I haven't been pinched yet, but when I touched it to try it out, it wasn't hot at all, so I knew it would work. Relieved.
[Included Parts:were they on?
Body and Band for fixing.
[Was there anything that disappointed you?
None!
If I had to say something, I would say that when the exhaust pipe rubs against the body, there is a very unpleasant sound of the gold material rubbing against each other.......View Detail
Excellent
Exactly to FMFUsed for FMF exhaust pipe.
The Large is perfect and does not get hot, so it will not burn clothing on contact.
The product is not bad looking, and I think it is functional & well-designed.View Detail
Excellent
Installed on DG32JXG250 TRICKERI replaced the exhaust pipe with a Specht exhaust pipe and the OEM Heat Guard moved outward a bit. Sometimes Jeans gets hot so I change it before I get burned.
As you can see in the picture, the heat seems to be avoided as it is back to near normal exhaust pipe.
The length seems to be more than 5cm shorter than Normal heat guard, but I think it's OK at first.
I like the looks of the NORMAL better, but I think this is the one.View Detail
Very Good
good-lookingOEM Product is not so good, but I'm glad I bought this Heat Guard because it looks great.
However, it is thinner than I had imagined and I would like it to be made more firmly.View Detail
Excellent
I processed and installed it.I machined and attached it to the BEAMS front pipe.
The standard Guard melted the hem of the Pants.
Since it is a commuter main, I decided to float it from the pipe to increase the effect as Heat Guard.
Do not use the supplied band, use the screw holes on the Exhaust Guard that comes with the front pipe.
I used the holes in PipeGuard as they are on the front side and drilled holes in PipeGuard to secure the rear side.
The front side is gradually bent at an angle to match the curve of the exhaust pipe and the rear side remains straight.
The Guard is all floating from the Pipe.
I've run it on the road and it doesn't seem to have any problems with vibration.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING