I am more then satisfied with their slim design

Takegawa Headlights bracket are more lightweight compared to stock bracket. With excellent quality and finishing surface for my chrome plating bracket. I will fully recommend to purchase it because it makes the bike looks better, cleaner and refresh (the looks will make the bracket like detaching from front fork). Installation is perfectly easy and fast with all parts provided on purchase. View Detail

I have bought and used the product.Very good position.I have traveled many places together with their favorite cars.I'm very satisfied.View Detail

I think it's expensive to be honest, but there is no other light bracket for 30φFork that is as simple as this one, so it's for those who want to refreshing.

I can't install it without taking off the Top Bridge, but I just have to endure the installation once because the split type Light Bracket is too messy. In a way, it's better than the separate type because it doesn't let garbage and rain in.View Detail

Used for APE 100
Well made and very nice construction.
Because it fits from the top of the Inner, it is possible to remove the Stem and make it bare.
Installation and removal is troublesome, but adjustments can be made later.View Detail

I used this when I installed Mukawa Front fork on FIMONKEY.
In the picture there is a stamp of Mukawa in SIDE, but Spec. Was it changed?
Since it is only engraved with Laser in the longitudinal direction on the back of the tube part,
There is not much argument made by Mukawa.
Light is going to be the style that came a while ago and I think that it makes me feel a bit stupid.View Detail

About quality and texture - The type 1 grey and black Monkey sticker from Honda are made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - Original sticker to complete the addition of an aftermarket right side cover on the Monkey 125 or even add it to the wall of stickers in the workshop.The metallic finish in the sticker is a thing of beauty.Products to buy together - This particular sticker goes hand in hand with an aftermarket right side cover when you are no longer using the original up style exhaust and have switched to a low style exhaust.Difficulty of installation - The installation of the type 1 grey and black Monkey sticker is an simple task that took 0.5 of an hour to complete.Common sense and a technique to evenly align the sticker is what is required to secure the sticker to the side cover.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the type 1 grey and black Monkey sticker is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the type 1 grey and black Monkey sticker , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The type 3 grey and red Monkey sticker from Honda are made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - OEM sticker to complete the addition of an aftermarket right side cover on the Monkey 125 or even add it to the wall of stickers in the workshop.The metallic finish in the sticker is a thing of beauty.Products to buy together - This particular sticker goes hand in hand with an aftermarket right side cover when you are no longer using the original up style exhaust and have switched to a low style exhaust.Difficulty of installation - The installation of the type 3 grey and red Monkey sticker is an simple task that took 0.5 of an hour to complete.Common sense and a technique to evenly align the sticker is what is required to secure the sticker to the side cover.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the type 3 grey and red Monkey sticker is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the type 3 grey and red Monkey sticker , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The front stand hooks from G-Craft is made from billet aluminum with detailed machining with a mix of silver and black anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my front head stem stand overkill when raising my Monkey125 for detailing. The addition of the front stand hooks were the perfect solution to allow the use of a stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the front stand hooks would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the front stand hooks is a simple task that took 0.5 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the hooks to the lower front legs.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these front stand hooks are priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for front stand hooks, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left side fork guard from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The left side fork guard from Tyga Performance is my favorite finished one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the left side fork guard from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the left side fork guard is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the left side fork guard to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the left side fork guard is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left side fork guard, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The right side fork guard from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The right side fork guard from Tyga Performance is my favorite finished one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the right side fork guard from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the right side fork guard is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the right side fork guard to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the right side fork guard is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the fork guards, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail