Perfect solution to allow the use of a stand with hooks

About quality and texture:G-Craft’s usual high machining quality is present here. CNC aluminum parts are lightweight, well-finished, and anodized for durability. The etched logo adds a clean custom touch.About the feeling of use:Provides a reliable hook point for a rear stand. Lifts the bike securely with no flex or misalignment. Also adds a stylish element to the rear suspension area.Products to buy together:Rear paddock stand with hook adapter is what's needed to make the most of these suspension hooks. Also front stand hooks that secure to the lower fork legs will allow for the front of the bike to be lifted too.Difficulty of installation:Very easy. Just remove the shock nuts, install the hook in it's place and torque to spec. Takes less than 15 minutes.Cost performance and comparison with other products:More expensive than basic hooks that secure to a swingarm, but far superior in build, fit, and finish. A premium option for those who value quality and reliability.About shipping and packaging:Well-packaged by Webike. Arrived in perfect condition with all hardware included.Any concerns, cautions, or advice when purchasing:Finish can scratch if you're careless with stand hooks. Make sure to torque bolts properly and check compatibility with your rear stand.Final thoughts:A small but very effective upgrade for frequent maintainers. Looks great, performs well, and adds utility without compromising the bike’s aesthetics.View Detail

About quality and texture - The front stand hooks from G-Craft is made from billet aluminum with detailed machining and an all black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my front head stem stand overkill when raising my Monkey125 for detailing. The addition of the front stand hooks were the perfect solution to allow the use of a stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the front stand hooks would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the front stand hooks is a simple task that took 0.5 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the hooks to the lower front legs.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these front stand hooks are priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for front stand hooks, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The suspension spool from G-Craft is made from billet aluminum with detailed machining and a mix of silver and black anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my rear stand with the platform fiitings a little uneasy due to the constant shifting. The addition of the suspension spools was the perfect solution to allow the use of my rear stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the suspemsion spools would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the suspension spools is a simple task that took 0.4 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the spools to the lower rear suspension mounting points.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these suspension spools are higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the suspension spools, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a orange anodized coating. About the feeling of use, I am happy with the addition of these swingarm covers with stand hooks to ad in easier maintenance on the drive chain and help protect the Grom while also adding some some style when compared to the original parts. Products to buy together, H2C have a full range of products specifically for the Grom and the front wheel ends would be ideal to also add to your cart to help add some protection to the front wheel. Difficulty of installation, I can say the fitment of the swingarm covers with stand hooks for my installation was average due to the rear end requiring to be lifted and supported to allow for removal of the rear axle before fitting. Cost performance and comparison with other products, The pricing of the product is great. You receive a simple yet effective designed part to ad in supporting and protecting your Grom. There are higher priced option available that incorporate a new chain adjustment but I find the H2C option to be great for the price they costs. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a black and silver anodized coating. About the feeling of use, The suspension spools are light weight and of a strong construction but the contact surface does mark up when used with steel pick up hooks. A must have addition for the Monkey 125 if you do your own maintenance. Products to buy together, Other highly detailed parts from G-Craft to help improve rider experience like the spindle holder would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the suspension spools for my installation was very easy due to the ease of access and simple nature of securing the spool ends with a spanner. Cost performance and comparison with other products, The pricing of the product is great. You receive a well designed part made from a high quality material with a matching finish. There is a cheaper option available but these are worth the extra money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - The type 1 grey and black Monkey sticker from Honda are made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - Original sticker to complete the addition of an aftermarket right side cover on the Monkey 125 or even add it to the wall of stickers in the workshop.The metallic finish in the sticker is a thing of beauty.Products to buy together - This particular sticker goes hand in hand with an aftermarket right side cover when you are no longer using the original up style exhaust and have switched to a low style exhaust.Difficulty of installation - The installation of the type 1 grey and black Monkey sticker is an simple task that took 0.5 of an hour to complete.Common sense and a technique to evenly align the sticker is what is required to secure the sticker to the side cover.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the type 1 grey and black Monkey sticker is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the type 1 grey and black Monkey sticker , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The headlight brackets from SP Takegawa is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I was unimpressed with the finish of the original headlight brackets with their plain painted finish. The transformation with the simple addition of these headlight brackets is amazing and I am more then satisfied with their slim design .Products to buy together - SP Takegawa have many products to purchase to continue adding a more attractive appearance to the Monkey 125 but the first on my list to go with the headlight brackets is the frame plugs as this is a small parts with a big impact.Difficulty of installation - The installation of the headlight bracket is a simple task that took 1.0 hour to complete. Common sense and the use of basic hand tools is all that is required secure the headlight brackets to the fork area with the included hardware.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the headlight brackets are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the headlight brackets, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The type 3 grey and red Monkey sticker from Honda are made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - OEM sticker to complete the addition of an aftermarket right side cover on the Monkey 125 or even add it to the wall of stickers in the workshop.The metallic finish in the sticker is a thing of beauty.Products to buy together - This particular sticker goes hand in hand with an aftermarket right side cover when you are no longer using the original up style exhaust and have switched to a low style exhaust.Difficulty of installation - The installation of the type 3 grey and red Monkey sticker is an simple task that took 0.5 of an hour to complete.Common sense and a technique to evenly align the sticker is what is required to secure the sticker to the side cover.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the type 3 grey and red Monkey sticker is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the type 3 grey and red Monkey sticker , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left side fork guard from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The left side fork guard from Tyga Performance is my favorite finished one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the left side fork guard from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the left side fork guard is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the left side fork guard to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the left side fork guard is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left side fork guard, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The right side fork guard from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The right side fork guard from Tyga Performance is my favorite finished one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the right side fork guard from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the right side fork guard is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the right side fork guard to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the right side fork guard is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the fork guards, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail