There are some conspicuous areas where the processing is messy.
Manufacturer and sales were horrible to deal with.
Manufacturer & seller pushes defective products to the buyer without inspecting them.
I wonder how reluctant they are to handle returns.View Detail

Repair marks on the Crack are so-so and the machining accuracy is poor. And Gap. We tried to be as careful as possible, but there were three cracks. It is not.

I thought the tank was bad and tried it with a different tank, but it did not fit after all.

One Side comes out of the air ductor even if you try to put the tank on the body. It is not possible to use it.

View Detail

About quality and texture - The automotive lining removal tool set from ProTools is made using plastic that is light weight and reasonably strong. No distorting when as intended, the quality from the overall fit and finish is perfect.About the feeling of use - The perfect automotive lining removal tool set to have on hand in the workshop for levering off lightly secured parts on the car, the motorcycle and even around the home.Products to buy together - A key product to also purchase for your lining removal would a metal pry bar, again there are many types but the metal four piece set from Signet thave you covered for the larger parts to be removed.Difficulty of installation - The installation of the automotive lining removal tool set is a simple task that took 0.1 of an hour to complete. Common sense is all that is required to select the correct lining removal tool for the part and fastener being separated.Cost performance and comparison with other products - I find the cost of all the products ProTools sell to be great value when compared to what most other companies sell their products for and the automotive lining removal tool set is no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the automotive lining removal tool set, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The oval up full exhaust from Over Racing is made from stainless steel with a high polished finish, the quality from the overall fit and finish is perfect. About the feeling of use - The oval up stainless steel exhaust system has everything going for it, with improved performance, increased appeal but the deep exhaust sound is the highlight for me. Products to buy together - A key product to purchase with the oval up full exhaust would be an open air intake to vastly increase the appeal by simply removing the original airbox. Difficulty of installation - The installation of the oval up full exhaust is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to muffler to the frame and the exhaust pipe to the engine. Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on higher price when compared to what most other companies sell their products for and the I find the oval up full exhaust is no different. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the oval up full exhaust , I chose sea freight so I could put the saved money toward additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing Tyga Performance products from Webike Japan is the best option when taking into account the shipping cost but depending on where you live you may be better off purchasing from Webike Thailand due to the much low product pricing.View Detail

About quality and texture - The front fender mount bracket from Over Racing is made from billet aluminum with detailed machining and a silver anodized surface finish all around, the quality from the overall fit and finish is perfect.About the feeling of use - The look of the front fender with the front fender mount bracket fitted is impressive when compared to the positioning of some of the other branded mount brackets available. Very well angled and appropriately styled for a road orientated Honda Monkey 125.Products to buy together - A key product to purchase to add more proportional and appropriately styling to the rear of the Monkey 125 is fender eliminator kit from Kitaco. That maintains all the features of the original fender while taking up less of a footprint..Difficulty of installation - The installation of the front fender mount bracket is a simple task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to secure the mount brackets to the fender with the Over Racing allen key bolts and then install onto the lower fork legs with the original Honda fork guard hardware.Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on higher priced when compared to what most other companies sell their products for and the front fender mount bracket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the front fender mount bracket, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The rubber grip set from Yoshimura are made from rubber and with a simple design and soft surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - An all round better grip then the original Honda Grom grips with a focus on comfort due to their shape and the material used. My finger tips no longer get bumb after riding to work on those cooler mornings.Products to buy together - A suggested product to purchase with the rubber gri set would be a heavy set of bar end weight to further increase comfort by removing addition vibration from the handke bars.Difficulty of installation - The installation of the rubber grip set is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the grips to the handle bar and thottle tube. An air compressor if available will ad in the removal of the original grips with ease.Cost performance and comparison with other products - I find the cost of all the products Yoshimura sell to be high when compared to what most other companies sell their products for and the rubber grip set is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the rubber grip set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The wire type special clutch cover kit from SP Takegawa is made from mostly cast aluminium but billet and forged pieces can also be found, the quality from the overall fit and finish is perfect.About the feeling of use - As you can see from the photo, there is a lot going on here and the special clutch cover is involved with quite a bit of it. Very much enjoy all the design and details that have gone into manufacturing this clutch cover and can highly recommend it to anyone looking to swap out their original clutch cover.Products to buy together - With so many addon available for this special clutch cover, my key product to purchase to further increase it's use would be the oil cooler especially when you consider the high temperatures that the bike will see in summer.Difficulty of installation - The installation of the special clutch cover is a intermediate task that took 1.5 hours to complete. Mechanical aptitude and the use of hand tools and a few special tools is what is required to access the engine internals, remove the centrifugal oil filter, assemble and fit the clutch cover to then finish with a clutch adjustment.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the special clutch cover is priced higher then its competitor.About shipping and packaging - With there only being a small cost difference between sea freight and EMS for the special clutch cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail