[Matériel/Matériaux].
・Body : résine
・Bolt'' (boulon) : acier
Taille
Diamètre : Environ 28 mm
Épaisseur : Environ 9 mm (sans les boulons)
・Bolt'' (boulon) : M6-20mm
Quantité]Corps principal X1 *Il ne s'agit pas d'une paire gauche et droite..
*Veuillez noter qu'il ne s'agit pas d'une paire.
*Ce produit comporte un boulon intégré dans le corps en résine. Veuillez noter qu'un serrage excessif peut endommager le joint du boulon et le corps.
*Les boulons peuvent être trop longs pour certains modèles (par exemple, Vespa).
*L'image comprend d'autres types et produits.
*Il arrive que les spécifications d'un produit soient modifiées à la convenance du fabricant. Veuillez comprendre.
[Material]
・Body: resin
・Bolt: Steel
[Size]
・Diameter: Approx. 28mm
・Thickness: Approx. 9mm (bolt not included)
・Bolt: M6-20mm
[Quantity] Main body x 1 *Not a pair of left and right.
*All M&Ms sculptures are handmade, so please be aware of the following before purchasing.
[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.
[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for "installation on motorcycles" and "indoor parking lot storage".
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.
・Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
・Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
・Prolonged riding under intense sunlight.
[Durability of paint and body]
・Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
・The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.
[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.
[Installation notes]
・This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
・In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin "body" and tighten the nut.
・Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
・May not be used in combination with a license plate cover.
・Installation on cars requires tightening with nuts.
*Please note that this is not a left / right pair.
*Other types and products are included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.