Acier chromoly (placage à 3 couches)
[Installation]
*L'arbre est un élément essentiel.
Veillez à ce que du personnel qualifié effectue les travaux d'installation dans l'atelier professionnel.
Veuillez le faire en utilisant l'outil approprié adapté à la forme de la tête de l'arbre.
Il est rayé sur le film de placage qui est appliqué à la surface de l'arbre, ce qui provoque de la rouille si vous serrez avec un outil inapproprié.
Veuillez vaporiser de la graisse sur la surface de l'arbre avant l'installation.
Il ne provoque généralement pas de rouille sur l'arbre lui-même car il applique le "procédé de revêtement à trois couches" de KOOD original sur la surface de l'arbre. Elle est causée par la différence de potentiel du métal, pour éviter la rouille des roulements de roue, etc.
Veuillez respecter les valeurs spécifiées par le fabricant pour le couple de serrage.
Veuillez confirmer l'écrou pour les véhicules qui doivent être montés avec l'écrou de l'OEM.
Veillez à utiliser un écrou neuf lorsque vous le voyez dans l'écrou, par exemple en cas de rayures causées par une chute ou une pièce fonctionnelle autobloquante. Cela permet d'éviter d'endommager la partie filetée de l'arbre.
[Sur la qualité des produits]
En ce qui concerne la gestion des produits, elle fabrique et gère dans un système parfait mais veuillez nous contacter avant le travail si vous avez des problèmes par hasard.
*En tout état de cause, nous ne pouvons pas répondre aux réclamations et aux produits retournés après le travail (comme faire passer l'arbre dans la roue) du tout.
A propos de la rouille
"L'arbre fabriqué en KOOD" a été soumis à un "procédé de revêtement à trois couches".
Il est doté d'un traitement de revêtement solide par rapport au revêtement de placage ordinaire. Il peut rouiller en fonction de l'utilisation, mais la qualité n'a pas d'importance.
Il est "rouillé".... la rouille provenant de l'extérieur roule sur la surface du placage
Rouille de transition. Rouille externe sur la surface plaquée
Détérioration du revêtement... Utilisation incorrecte d'outils, marchepieds ou chutes en conduisant, etc.
*La rouille n'est pas couverte par la garantie.
Merci de votre compréhension.
*Il contient d'autres parties de la photo.
*Veuillez noter que les spécifications du produit peuvent changer pour des raisons liées au fabricant.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.