•60Φ ;
•Eclairage LED blanc
•avec indicateur (feux de route, neutre, hydraulique, clignotant)
•140km/h
•Exclusivité pour les véhicules à batterie 12V
•Compteur ODO analogique
•Compteur analogique TRIP
•Temps d'installation estimé : 1.0h
*Il nécessite un support de compteur anti-vibration pour son installation.
*スピードメーターは国産モデルで一般な 「60km/h=1,400rpm」 規格の純正機械式メーター車 (メーターケーブルを使用する車両) であれば基本的に使用できます.メーター規格が異なる外車や, 一部旧車などには使用できません.
*12Vバッテリー車専用.バッテリーレス車, 12Vバッテリー車専用 (12V電装にコンバートしたモデルも含む) では正常に作動しません.
*Il n'est pas complètement étanche.メーター内外の気温差や湿度により, ガラス面が曇る場合があります.
*純正メーターを取り外すことによって, 各種インジケーターが使用できなくなる場合があります.必要に応じて別途ご用意ください.
*メーターケーブルは消耗品です.アウターチューブに亀裂や破損があると, メーター内部に水分や油分, 埃などが侵入し, 故障の原因になります.機械式メーターを交換する際は必ずメーターケーブルの点検も同時に行ない, 必要に応じて新品に交換してください.
*スピードメーターとタコメーターは内部構造と文字盤色の違いにより, 発光状態 (特に夜間) の差が出てしまいます.あらかじめご了承ください.
*ハーネスの結線は車両に合わせた加工が必要です.ギボシ端子等は別途ご用意ください.
*Veuillez noter que les spécifications du produit peuvent changer pour des raisons liées au fabricant.
・60Φ
・White LED lighting
・With indicators (high beam, neutral, oil pressure, turn signal)
・140km/h
・For 12V battery vehicles only
・Analog ODO Meter
・Analog TRIP Meter
・Approximate installation time: 1.0h
*An anti-vibration meter bracket is required for installation.
*The speedometer can be used basically with stock mechanical meters (vehicles that use a meter cable) of the "60km/h=1, 400rpm" standard that is commonly used with Japanese models.This product cannot be used for foreign vehicles with different meter standards and some old vehicles.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, dust, etc. may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.
*The speedometer and tachometer are different from each other due to the difference of the internal structure and the color of the dial, which causes the difference of the luminous state (especially at night).
*The wiring of the harness must be modified to suit the vehicle.Please prepare the crimp terminal etc. separately.
*There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.