[Quantité] 1pc.
[Taille]
Diamètre de la vis 12mm
Atteindre 19mm
Taille de la clé à bougie16mm
Forme Type de terminal séparé
[Correspondance NGK] D6EA, D7EA, D8EA, DR6EA, DR7EA, DR8EA, DP6EA9, DP7EA9, DP8EA9, DPR6EA9, DPR7EA9, DPR8EA9, DPR7EIX9, DPR8EIX9, DCPR7E (pour HARLEY DAVIDSON) DCPR8EK, DCPR8EIX autres
* La photo du produit est pour référence seulement. Le produit est vendu à la pièce.
*Type de registre (avec Résistance)
*La taille de la clé à bougie est de 16 mm, ce qui est utilisé pour la bougie C.
*Celles dont le diamètre de la vis de montage est de 12 mm et la longueur de la vis de montage de 19 mm sont toutes compatibles.
*Il est possible de retirer la borne à rivet.
* Veuillez noter à l'avance que l'annulation et / ou le retour de ce produit ne peuvent être acceptés une fois la commande passée.
BOR14LGS (NGK "D plug" size)
[Quantity] 1
[Size]
・Screw diameter 12mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] DP6EA9, DP7EA9, DP8EA9, DPR6EA9, DPR7EA9, DPR8EA9, DPR7EIX9, DPR8EIX9, DCPR7E (for Harley), DCPR8EK, DCPR8EIX etc.
*Heat value correspondence is from No. 6 to No. 8.(Confirmation of the amount of protrusion in the combustion chamber is required.)
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Resistor type (with resistor).
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.The ones with 12mm thread diameter and 19mm thread length are compatible, but they protrude into the combustion chamber longer, so it is necessary to check if there is any interference with the piston head.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.