Numéro de pièce du fabricant : RF-1SS
Couleur : acier inoxydable
[Taille]
•Longueur : Environ 74 mm
•Largeur : Environ 225 mm
•Hauteur : Environ 90 mm
&bull ; (La taille ci-dessus ne comprend pas la partie du support de montage)
•Diamètre du ventilateur : Environ 70 mm
*Veuillez vérifier le contenu du produit sur la photo.
*Le contenu du produit varie selon le lot. L'utilisation de ce produit ne pose aucun problème.
*Avertissez le conducteur à l'aide du voyant LED pendant le fonctionnement du ventilateur.
*Vous pouvez également vous attendre à retarder la détérioration des performances du pétrole ainsi que la mesure de la surchauffe.
*Il est impossible d'utiliser le filtre à huile pour l'EVO car il interfère.
*Veuillez vous assurer d'utiliser un filtre à huile pour TC.
*Veuillez régler le tuyau d'huile de manière à ce qu'il n'interfère pas avec le cadre et le câblage.
*Veuillez vous assurer d'effectuer une opération d'essai après l'installation, et vérifier s'il n'y a pas de fuite d'huile au niveau du joint de la pièce d'adaptation.
*La conception du tuyau de montage est étanche.
*Par conséquent, veuillez faire le travail sur l'ascenseur.
*Les couleurs du contenu et du tuyau peuvent différer de la photo en fonction du lot de production.
*Veuillez noter que la désignation de la couleur n'est pas acceptable.
Manufacturer's Part Number: RF-1SS
Color: Stainless steel
[Size]
●Height: Approx. 74mm
●Width: Approx. 225mm
●Height: Approx. 90mm
(The above sizes do not include the mounting bracket.)
●Fan diameter: Approx. 70mm
*Please check the contents in the image.
*There is a slight difference in the contents depending on the lot.There is no problem in using it.
*LED light informs the rider when the fan is running.
*It is expected to delay the deterioration of oil performance as well as to prevent overheating.
*Oil filters for EVO cannot be used due to the interference.
*Make sure to use the oil filter for TC.
*Set the oil hose in a way that it does not interfere with the frame or wiring.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight.
*Therefore, the work must be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images.
*Neofactory cannot accept color specifications.