Il s'agit d'un support arrière qui peut être monté sur l'un ou l'autre des ESTRELLA pour l'injection du carburateur.
L'ESTRELLA est une moto classique représentant KAWASAKI qui continue à figurer dans le catalogue, correspondant même maintenant à la réglementation des émissions tout en améliorant le point fin qui est apparu en 1992. La conception de base de la carrosserie n'a pas changé, mais il faut faire attention lorsque vous achetez les pièces de rechange, car les détails ont été modifiés d'année en année.
Le porte-avions arrière est l'un d'entre eux. Il est impossible de faire correspondre le support arrière de l'injecteur du constructeur KAWASAKI aux spécifications du carburateur.
Cependant, elle a pu concevoir un porte-bagages arrière qui peut être monté à la fois à l'endroit où elle a été préparée et sur le corps de l'ancienne et de la nouvelle ESTRELLA.
Elle est différente de la spécification du carburateur d'ESTRELLA et de la spécification du véhicule à injection, mais elle a été conçue de manière à ne pas interférer avec l'ouverture et la fermeture du siège, qu'elle soit montée sur l'un ou l'autre véhicule. En outre, les ESTRELLA sont des dessins qui étaient basés sur un dessin et le noir, et basés sur le placage selon l'année et la version, mais il a été conçu et fini avec de la peinture noire dans une mince barre ronde afin de ne pas être perceptible.
La partie inférieure est de 10 mm et elle adopte une mince barre métallique de 9 mm dans la partie supérieure de la plaque, mais elle peut fermement résister aux vibrations propres à un seul cylindre car elle adopte une conception solidement renforcée avec une résistance aux vibrations.
Il met l'accent sur le design ! Il est conçu de manière à ce que la partie supérieure du conseil d'administration soit dans l'axe du siège.
Il s'agit certes de sécuriser fermement l'espace entre le siège et le porte-bagages arrière, mais il privilégie la forme au moment du montage du porte-bagages arrière en esquivant la ligne du siège plutôt qu'en l'écartant simplement.
Il est d'une compatibilité exceptionnelle avec les porteurs arrières de la Marche Mondiale.
Il est possible de monter la base générique d'une boîte arrière générale sans problème car elle est conçue en supposant que non seulement le chargement mais aussi le montage d'une boîte arrière. Il est parfaitement compatible avec la boîte arrière de la Marche Mondiale.
Il est également possible de monter une boîte arrière de classe 40L car sa capacité de charge est de 5 kg.
C'est un design qui fait bonne figure sur un corps mince tout en étant habile, en adoptant comme matériau une fine barre ronde afin de ne pas détruire l'image d'ESTRELLA.
World Wolk has created a rear carrier that can be installed on both carbureted and injected ESTRELLA
Introduced in 1992, ESTRELLA is one of KAWASAKI's most popular classic bikes.The basic design of the vehicle has not changed, but the details have been changed depending on the year, so be careful when purchasing aftermarket parts.
The rear rack is one of them.KAWASAKI stock rear carriers for injected vehicles cannot be fitted to carbureted models.
However, with both the new and old ESTRELLA chassis, World Walk was able to design a rear rack that would fit both.
Although the details of ESTRELLA's carbureted and injected models are different, World Walk has designed this product so that it will not interfere with the opening and closing of the seat when installed on either model.Depending on the year and version of the ESTRELLA, there is a chrome based design or a black based design, but World Walk designed the ESTRELLA with thin round bars and finished it with black paint.
The legs are made of 10mm and the top plate is made of 9mm thin metal rods, but the design is reinforced to withstand the vibrations of a single cylinder.
Design is also important!Designed so that the top panel part follows the line of the seat
In addition to securing the clearance between the seat and the rear carrier, World Walk has tried to keep the form of the rear carrier by following the line of the seat rather than simply widening it.
Compatible with World Walk rear carriers
It is designed not only to carry luggage but also to fit a rear box, so a universal base for a rear box can be installed without any problem.Of course, it also goes great with the World Walk rear box.
The load capacity is 5kg, so it is possible to install a 40L rear box.
To keep the image of ESTRELLA intact, World Walk used a slender round bar as the material to create a design that is rugged yet fits the slim body.