Crochet à pince
Product # D36-11-221
10.19 EUR (1,669 JPY)
List price: 11.61 EUR Save 12%
+17 Point Webike (0.1 EUR)
Product # D36-11-221
10.19 EUR (1,669 JPY)
List price: 11.61 EUR Save 12%
+17 Point Webike (0.1 EUR)
4.1 / 5
9 avis
As you can see, it is a product that can be attached to the legs of the second seat to add Tie DownHook.
It is important to note that the second seat is designed to be used with the seat out (ready to be used as a seat) and not folded.
It looks like you can use it folded up, but you can't because the seat itself floats when you try to pull it down with Tie Down.
I thought I could use it for a moment because the Seat that I was using in the folded state would not lift up easily, but if I continued driving, the Seat would lift up and the body of the car would fall down at the same time.
Of course, if you use it with Seat out, there is no problem.
However... I almost never use the RearSeat, so I always fold it up to increase the cargo capacity.
So, ignore the original usage and don't do it if it's true. Seat folded. I'm forced to use it in
The way I did it was to clamp the pipe in a position that was 90-degrees different from the correct position.
In this method, the pipe clamp is subjected to a great deal of force in the direction of rotation, and in the worst case, the clamp may cause the hook to rotate and the Tie Down to loosen.
It is completely misused and all at your own risk.
Seat. "Hard to float." In the worst case, there is a very high possibility that the motorcycle will float and fall over.
However, if you use the Belt MountHook High ace for 200 series (https://www.webike.net/sd/24635762/) to hang the bike from the top first, and then pull it downward, you can prevent the bike from falling over even in the worst case scenario.
I don't want my motorcycle to fall over or have an accident, so I use them together properly.
In addition, the clamp part of the product is quite a gorgeous material.:It's aluminum, and the surface is moist and polished as if it were Barrel polished, and it looks pretty good.
However, for some reason, the hooks are unusually tacky, and commercially available steel hooks are still used.
I don't think anything of it, because I'm in the camp where quality is good, but if you're looking for a luxurious interior, it might bother you.View Detail
I bought this for the purpose of applying Transporter's Tie DownHook.
Since it can be mounted anywhere in the Piping section, you can find a good spot to make a Spot by yourself.
I couldn't tighten the bolt very tightly because of Hexa, so I applied Screw lock agent to it.View Detail
I always ride a HUSQVARNA TE250 for off-road fun, and I use a Transporter to carry it to the off-road course. This time I changed from Caravan E25 to High ace wide body middle roof. By the way, it is a Gasoline car and the fuel consumption is a little low, but I am very satisfied because I changed it cheaply.
I was having trouble finding a HookPoint to put the Tie Down on when loading the motorcycle, so I bought this product to make a HookPoint on the second seat. It was very convenient and easy to use.
Installation is very easy with just a few tools. It took me about 10 minutes to install. I finished it quickly instead of Sunday Large work.
I think it can be used not only for High ace but also for Nissan's Caravan, etc. If you are having trouble with HookPoint, this is a great recommendation.
I think I'll paint it next time so the color doesn't show up.
I hope you all give it a try!View Detail
I use a 200 series High ace for the Transporter.
When you hang Tie Down on the Front, here! There's no place for that, is there?
I recommend this product because you can make your own place to hang it in the ideal place.
The quality is not very good lol.View Detail
Tie DownHook on a High ace or other motorcycle when loading the motorcycle If you don't have enough space and can't pull at the right angle, the Motorcycle will be unstable to secure It's done and dangerous
This product is available in Eyebolt (with M8 Spring washer) and Aluminum Quantity of pipe clamp:Set, and the Transporter's Second seat Base is set to It can be installed with Bolt On This is more convenient to install SMART than making your own
Buy three and attach them to the Center and both Sides to load two motorcycles You can
By the way, using wheel chocks (WheelClamp) together is very stable for loading Base of Aluminum is cast, and although it does not seem to be very hard, it is a good choice for strength It is enough for
In addition to this, it seems that Universalism is high with a lot of ingenuityView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
S'il vous plaît sélectionnez l'option avant d'ajouter à votre panier.
Service Clients
INFORMATION
A PROPOS DE NOUS
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.