DRC Levier de frein court
[How is it used?Because Lever of WR250X which I got used was bent, I bought it for Repair. This WR250X was equipped with Armor Handguard made by Zita, but it seemed that the Hand guard came inside by ...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
DRC Dura Pignon avant
I chose it because it had the name of my car on it.When I installed it, I needed a Spacer, which is slightly different from the OEM Product, and I realized again that it is a Universal Product.The dri...
DRC Crème de perles
I use it to replace CUB, SR, and Tube-style Tires.good pointCompact and easy to carry. Shaped like a hair wax. You can take it with you on the go.With the included Sponge, you can smoothly apply it to...
DRC Bouchon de radiateur
Most Motorcycle Radiator cap is a common item, so it can be installed on any Motorcycle.In the normal product, when the pressure in the cooling path exceeds 1.1kgf/cm2 due to thermal expansion, the sp...
DRC Tuyau d'échappement 4-Cycles
It is easy to install because it can be bent freely along the exhaust pipe. It is easy to install because it can be bent freely along the exhaust pipe.
DRC Pignon arrière-S Dura
I bought it to change to 42T→45T because the OEM secondary reduction ratio of DJEBEL250xc is too long and difficult to handle on the forest road.The design is good and there was no problem at the time...
DRC Boulon conique de pignon / écrou
I used it to replace the Sprocket on my 2007 wr250X with less than 16,000 miles. I fixed it with Red Lock to prevent loosening and it is perfect. Drivetrain weight reduction is easy to feel!
DRC Emballage de cravate
It is convenient to be able to use it many times because it can be removed with Release.
DRC 161 Miroir hors route
This is a foldable Mirror for Off-road. It's been sold for a long time, so I guess it's already a standard product.Originally, this product was probably designed to keep it from breaking or cracking i...
DRC Wide Footpeg Chromoly
Wide Footpeg on Recommendation of surrounding friends.It is probably not even a few centimeters wide, but when I replace it, the footpeg tread is completely different.It is also Recommendation's Parts...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
DRC Kit de tuyau de radiateur (Y)
I bought this hose kit from DRC because my old OEM hose is almost 10 years old. It fits like an OEM hose but with of course the added bling points. This looks good on the WR250R and I believe it will ...
DRC Levier d'embrayage COURT
Because it is using the clutch holder for KL250 Sherpa, it is long if it is NORMAL, so I changed it here. It becomes the length of just three fingers and is just right. Because the price is cheap, it ...
DRC Kit de tuyau de radiateur (K)
When I moved the LLCReserver tank, I changed it anyway.It may be quite tough to maneuver if you have a Slider attached.
DRC Kit de tuyau de radiateur (H)
I chose this one to protect the Engine on my 2012 crf250l for the Motocross course.I don't have a water temperature gauge on it, so I don't know how well it performs, but I believe the cooling effect ...
DRC Levier d'embrayage COURT
It is easy to install, but it is not suitable for ・・・・ XR250 (sweat). The construction is short and I think it is great, but the stop-lamp of the rear fender doesn't turn red even if you brake front b...
DRC Levier d'embrayage COURT
I used it on a '99 klx250, the OEM Lever was deteriorating badly over time, so I tried this one, which is no different in appearance from the OEM.I went with a 3Finger short while I was replacing it.T...
DRC Levier d'embrayage COURT
I used it on my xr250MOTARD, the OEMLever has deteriorated badly over time so I tried this one, which is no different in appearance from the OEM.I went with a 3Finger short while I was replacing it.Th...
DRC Levier d'embrayage COURT
After the installation, I went to the forest road. At first, I felt a sense of discomfort because the bend of the short lever is different from the short lever I used to use, but I got used to it, the...
DRC Levier d'embrayage COURT
Compared to the rough-and-ready short lever that I used to use, the bend of the finger part has become straighter and the length has become longer by 5-6mm.:Pair (for Left and Right) I'm thankful that...
DRC Levier d'embrayage STD
I use this one because it's cheaper than buying the OEM.There is a solid cutout for folding and a neat bush in the pivot section.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
DRC Jauge de niveau d'huile à fourche avant
I bought this for ForkOH.It was a little difficult to suck out the hard oil, but the work itself was very easy!Maybe it's for softer Oil.
DRC Pompe à pied F501 STD
I bought this as an emergency when the air compressor in my Garage broke. As a result, I realized that this is enough for about 1 Tire air pressure check a week. This is also enough to check the air p...
DRC Outil de coupe en aluminium
It was said to be available in 420 Chain, but it was not available.
DRC Outil de coupe en aluminium
I used it to cut a 520Size Chain.If you combine a Socket with a Handlebar of a reasonable length, you can useI was able to easily cut the Chain without dropping the Pin head.In addition, I changed to ...
DRC Conducteur de joint de fourchette 40-50mm
I bought the OEM tool for my CRF250X because it looked like a pain in the ass to get.My impression is that it's normal.They work well for the price.I've never used anything other than this, so I can't...
DRC Outil à chaîne PRO 420-520 Aluminium Cut / Riv...
Used for Clip type of seal chain (420-SRX)At first I thought it would be easy because it is a Clip type and I thought there would be room.However, the O-ring of the Seal chain was unexpectedly strong,...
DRC Mini-pompe C302 Mini-plancher
It is Large strange to put Air into Tire with a tired body.But with this one, it's rather easy to get in.It'll take about 100 hits to get about 0.5 in.At first it felt a little large, but once it's in...
DRC Jauge de niveau d'huile à fourche avant
good pointThe oil level can be adjusted with one hand.It's huge that Syringe doesn't have to be hard to pull or support the gauge.What I'd like to see improvedPipe stuck? It's useless if it comes off ...
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
DRC Bottes Sac
Off-road boots are pretty heavy, and if you're driving an Enduro for a couple of nights, you'll be carrying multiple boots, but if you have this bag, it's still very convenient, because if you put the...
DRC Bottes Sac
I used to carry my Boots in the box they came in when I bought them, but off-road they get muddy and the box gets ruined when it's wet, so I bought this Back.This Back can be used to wrap Boots and is...
DRC Gants de mécanicien
Fit and breathability is good, so you will not feel stuffy even when working. The material is firm and stretchy.
DRC Bottes Sac
This is my second purchase.The Boots used are Alpinestars TEC3, and the Bag has plenty of room for the height of the Boots.Good point:The upper part of the Bag is Mesh, so it can keep the moisture out...
DRC Bottes Sac
The Boots are loaded in the car, but I feel like I can just put them in the Back to make the interior of the car look nicer.The bag is breathable and dry mud falls into the bag so it's easy to clean.
DRC Bottes Sac
The size of TEC7 is US 9, but I feel that the limit is in. If you use it for a long period of time, it may break due to the strain on the Zipper part. I was glad to have a little bit more Large.
DRC Gants de mécanicien
Normally it is the size of the M Size, but I bought the M as it is because I have a little extra finger, but it is the size feeling of the eye that is much smaller.It's a tight fit when you put it on ...
DRC Bottes Sac
Not using Off-road boots but Racing boots (SIDI Cydi : Used with Vortice Air On-Road BootsWhen carrying the equipment when running Circuit with Transporter, I could not put together only Boots and it ...
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING