/Matériau des tuyaux d'échappement : Titane
Matériau du silencieux : Titane
Modèle de système : 4en1
[Taille]
Diamètre du tuyau d'échappement : Φ42.7
Diamètre extérieur du tuyau de queue : Φ60.5
[Contenu du produit]
Tuyau d'échappement x1pc. (pour 1 véhicule)
Collecte de la partie
Tuyau de queue
Printemps x8pcs.
Silencieux
Déflecteur de fin
Bandeau de silencieux
Support de silencieux
[Données sur la maintenance]
Boulon de vidange : Disponible
Remplacement du filtre à huile : Détachement de collecte de pièces
Stand central : Non disponible
*Le déflecteur d'extrémité est déjà installé sur le silencieux lors de l'expédition.
*Il ne contient pas de bande de silencieux car le support est fixé au silencieux conique en titane V-1/V-2/V-3.
Veuillez ne pas retirer la cloison silencieuse équipée du NITRO RACING Silencer. En outre, il est recommandé d'inspecter périodiquement et de réviser le silencieux à l'intérieur de la laine de silencieux.
Le kit de marche arrière NITRO RACING est nécessaire pour l'installation de ce produit.
Le support d'échappement installé sur le véhicule montré sur l'image est un support fabriqué à l'origine. Le support d'échappement proprement dit, fixé au kit, aura la forme d'un support de tuyauterie.
* Veuillez noter à l'avance que l'annulation et / ou le retour de ce produit ne peuvent être acceptés une fois la commande passée.
・Exhaust Pipe Material: Titanium
・Silencer material: Titanium
・Assembly method: 4in1
[Size]
・Exhaust pipe diameter: Φ42.7
・Tail pipe outer diameter: Φ60.5
[Set components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Maintenance Data]
・Drain bolt: Available
・Change oil filter: Manifold section needs to be detached
・Center stand: Not available
*Installation image and product configuration are for reference only.
*The end baffle is pre-installed on the silencer at the time of shipment.
*NITRO RACING Rearset KIT is required to install this product.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*The exhaust bracket of the vehicle shown in this page is the original one.The exhaust bracket included with the KIT is a pipework shape.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
It is forbidden to drive on public roads with the end baffles removed.
*CB750F: In the case of using with the third party's Oil Cooler KIT, it may interfere with the fitting of the oil pan side.In this case, it is necessary to change the fitting angle to a different one and adjust it so that it does not interfere with the exhaust.
*CB900F / 1100F: This product cannot be used in conjunction with the stock oil cooler KIT, so it is necessary to change to an third party's oil cooler KIT.At this time, please make sure that the fitting parts on the oil pan side do not interfere with the exhaust.If interference is observed, it is necessary to replace the fitting with one that has a different angle and adjust it so that there is no interference.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.